Discounts Of Up to 75% Off On Flash Sale Products Until Supplies Last SHOP NOW

Full Page View
Lookbooks and News
Tags
RECENT POSTS
create Legacy Team1
access_time February 24, 2022
create Legacy Team1
access_time February 23, 2022
create Legacy Team1
access_time January 18, 2022
create Legacy Team1
access_time January 14, 2022
create Legacy Team1
access_time December 05, 2021
create Legacy Team1
access_time December 05, 2021
create Legacy Team1
access_time November 09, 2021
create Legacy Team1
access_time October 07, 2021
create Legacy Team1
access_time September 05, 2021
create Legacy Team1
access_time September 02, 2021
create Legacy Team1
access_time August 12, 2021
create Legacy Team1
access_time July 29, 2021
create Legacy Team1
access_time July 28, 2021
create Legacy Team1
access_time June 29, 2021
create Legacy Team1
access_time June 12, 2021
Icon Racing Fall 2019 Motorcycle Street Helmets Collection

LUCKYLID3

AIRFRAME PRO HELMET

A-B-G: Always be gamblin’, because if you ain’t gamblin’, you ain’t livin’. Close calls and closer cars—in the Airframe Pro Lucky Lid 3, going for broke never looked so good. The third episode in a hot run of lids, this time we drew the dead man’s hand, only to laugh and up the ante. The AFP is built using the “Angle of Attack” orientation for an aggressive sport bike riding posture. So read ‘em and weep, because when you play with ICON, you go all in.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFRAME PRO LuckyLid3 - Gold $420.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Handmade composite shell, hand-applied design, and precision manufacturing techniques.

SHIELD

Includes Clear Fog-Free Icon Optics™ shield and RST Gold Icon Optics™ shield.

LINER

Five-Piece Modular Liner With Moisture-Wicking Hydradry™ Liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

9 air intakes and 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

WEIGHT

Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light.

GOING FOR BROKE NEVER
LOOKED SO GOOD

EXTERIOR

AIRFRAME PRO HELMET

A decrease of both drag and weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes and five exhaust vents, ventilation is a premier feature the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep -channels in the liner enhances airflow by routing more air effectively.

SHIELD

AIRFRAME PRO HELMET

The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon TracShield is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our RapidRelease shield change mechanism, the TracShield can be used on the AIRFRAME PRO and AIRMADA helmets.

INTERIOR

AIRFRAME PRO HELMET

The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Airframe Pro’s competitors.

PLEASUREDOME3

AIRFLITE HELMET

Last time we checked there were three war parties in close pursuit. All headed west and in heaps of trouble. Out here in the wasteland only obnoxiously overbuilt gas- guzzling vehicles survive. With the Airflite Pleasuredome3™ on your head, you’ll always ride supercharged, never mediocre. So load up your blood-bag, 12-gauge auto-loader, and rattle cans of silver...it’s all shiny & chrome from here on out.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFLITE PleasureDome3 - Brown $290.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded Polycarbonate shell for strength.

SHIELD

Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Dark Smoke shield not included.

LINER

Removable HydraDry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

IT’S ALL SHINY & CHROME
FROM HERE ON OUT.

EXTERIOR

The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference.

SHIELD

The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

TRUMBULL

AIRFLITE HELMET

Why have the Eye of the Tiger when you can have the whole damn face? With orbitals as white as milk of magnesia, it’s either bravery or glaucoma. No one quite knows for sure. One thing we’re sure of is that the Airflite Trumbull™ delivers symbols of strength, vitality, and health. All with a subtle shout-out to a stadium long gone. Bless you, boys.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFLITE Trumbull - Orange $290.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded Polycarbonate shell for strength.

SHIELD

Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Dark Smoke shield not included.

LINER

Removable HydraDry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

WHY HAVE THE EYE OF
THE TIGER WHEN YOU CAN
HAVE THE WHOLE DAMN
FACE?

EXTERIOR

The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference.

SHIELD

The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

UNCLE DAVE

AIRFLITE HELMET

There's always one undead mystic medicine man in the family, and ours is Uncle Dave. Misunderstood with a soul as black as night itself, he gets a little stabby when the full moon lights the night sky. A reworked graphic from the ICON vault o’ wonder, the Airflite Uncle Dave™ helmet is back for another round of petrol spells and unsheathed action.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFLITE Uncle Dave - Black $290.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded Polycarbonate shell for strength.

SHIELD

Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Dark Smoke shield not included.

LINER

Removable HydraDry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

MISUNDERSTOOD WITH A
SOUL AS BLACK AS NIGHT.

EXTERIOR

The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference.

SHIELD

The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

RUBATONE

VARIANT PRO HELMET

Darkness isn’t just for the night. Enter a state of the achromatic color of least lightness combined with our unique finish; the Variant Pro Rubatone™ helmet is here to wow the midnight masses. Pair with one of our RST™ shields for the ultimate eye-catching experience.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
VARIANT PRO Rubatone - Black $350.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Fiberglass / Dyneema / Carbon fiber shell.

SHIELD

Includes Clear Fog-Free Variant Pro Precision Optics™ shield.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

INTERMEDIATE OVAL - The most common helmet fit type, the Intermediate Oval head is slightly longer front-to-back than it is side-to-side.

VENTING

BEST - 8 air intakes and 2 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

WEIGHT

(IN BETWEEN LIGHTEST AND LIGHT) - Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light.

DARKNESS ISN’T JUST
FOR THE NIGHT

EXTERIOR

The wind tunnel-refined shell, executed in a Fiberglass/Dyneema/Carbon matrix, forms a solid first line of defense. The Variant Pro's signature visor system not only looks aggressive, it contributes to improved vision by helping block out bright sunlight while producing minimal lift characteristics.

SHIELD

The fog-free Variant Pro™ shield, coupled with a reshaped eyeport, increases peripheral vision and and produces an unmatched distortion free line of sight so you can keep your eyes on the prize.

INTERIOR

The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Variant Pro’s competitors.

TOTEM

VARIANT PRO HELMET

Immortalizing characters and events, totem poles have come to symbolize the Pacific Northwest. Riding amongst the wilderness of ICON’s home base, it all becomes clear. Except when it’s raining, and then it’s a bit cloudy.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
VARIANT PRO Totem - Black Grey $400.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Fiberglass / Dyneema / Carbon fiber shell.

SHIELD

Includes Clear Fog-Free Variant Pro Precision Optics™ shield.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

INTERMEDIATE OVAL - The most common helmet fit type, the Intermediate Oval head is slightly longer front-to-back than it is side-to-side.

VENTING

BEST - 8 air intakes and 2 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

WEIGHT

(IN BETWEEN LIGHTEST AND LIGHT) - Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light.

RIDE AMONGST THE
WILDERNESS

EXTERIOR

The wind tunnel-refined shell, executed in a Fiberglass/Dyneema/Carbon matrix, forms a solid first line of defense. The Variant Pro's signature visor system not only looks aggressive, it contributes to improved vision by helping block out bright sunlight while producing minimal lift characteristics.

SHIELD

The fog-free Variant Pro™ shield, coupled with a reshaped eyeport, increases peripheral vision and and produces an unmatched distortion free line of sight so you can keep your eyes on the prize.

INTERIOR

The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Variant Pro’s competitors.

ACENSION

VARIANT PRO HELMET

Hopped up on a royalty-free mix of techno beats and trance vocals, the Variant Pro Ascension™ heads deep into the mix. No half-shirted Euro DJs here, just the fractured lines of prismatic tempo shifts. Take the BPM up a few clicks and let Qbert do his thing.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
VARIANT PRO Acension - Red $400.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Fiberglass / Dyneema / Carbon fiber shell.

SHIELD

Includes Clear Fog-Free Variant Pro Precision Optics™ shield.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

INTERMEDIATE OVAL - The most common helmet fit type, the Intermediate Oval head is slightly longer front-to-back than it is side-to-side.

VENTING

BEST - 8 air intakes and 2 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

WEIGHT

(IN BETWEEN LIGHTEST AND LIGHT) - Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light.

HEAD DEEP INTO THE MIX

EXTERIOR

The wind tunnel-refined shell, executed in a Fiberglass/Dyneema/Carbon matrix, forms a solid first line of defense. The Variant Pro's signature visor system not only looks aggressive, it contributes to improved vision by helping block out bright sunlight while producing minimal lift characteristics.

SHIELD

The fog-free Variant Pro™ shield, coupled with a reshaped eyeport, increases peripheral vision and and produces an unmatched distortion free line of sight so you can keep your eyes on the prize.

INTERIOR

The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Variant Pro’s competitors.

CONSTRUCT

VARIANT PRO HELMET

When it all comes down to it, the proof is in the pudding. That’s why we didn’t cover the Variant Pro Construct™ hand-laid composite shell; we displayed it. We leave the finish raw to showcase the hand of its crafting. It’s topped off with our Rubatone finish for a unique helmet in its purest form.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
VARIANT PRO Construct - Black $375.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Fiberglass / Dyneema / Carbon fiber shell.

SHIELD

Includes Clear Fog-Free Variant Pro Precision Optics™ shield.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

INTERMEDIATE OVAL - The most common helmet fit type, the Intermediate Oval head is slightly longer front-to-back than it is side-to-side.

VENTING

BEST - 8 air intakes and 2 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

WEIGHT

(IN BETWEEN LIGHTEST AND LIGHT) - Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light.

A UNIQUE HELMET IN ITS
PUREST FORM

EXTERIOR

The wind tunnel-refined shell, executed in a Fiberglass/Dyneema/Carbon matrix, forms a solid first line of defense. The Variant Pro's signature visor system not only looks aggressive, it contributes to improved vision by helping block out bright sunlight while producing minimal lift characteristics.

SHIELD

The fog-free Variant Pro™ shield, coupled with a reshaped eyeport, increases peripheral vision and and produces an unmatched distortion free line of sight so you can keep your eyes on the prize.

INTERIOR

The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Variant Pro’s competitors.

CONFLUX

AIRFORM HELMET

Sure, we’ve got the helmet graphics game on lock, we know that. We also know that not everyone wants a sweet dragon or a bald eagle in aviator sunglasses on the side of their lid. For those who wish to let their riding do the talking, we give you the AIRFORM Conflux™. Fast lines, solid colors, and a drop shield to boot. You can also customize the shield and spoiler to take your AIRFORM to the next level.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFORM Conflux - Blue $225.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded polycarbonate shell for strength and durability.

SHIELD

Includes Dark Smoke Internal DropShield™ and Clear quick-change Fog-Free Optics™ Shield with Prolock™ shield locking system.

LINER

Hydradry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 air intakes and 1 exhaust port are coupled with deep channeling in the interior energy absorbing EPS foam to keep your head cool.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

FAST LINES, SOLID
COLORS

EXTERIOR

Streamlined and race inspired, the Airform hits the street ready for speed. By sculpting the traditional neckline of the Airform it allows your head to slip in and out with ease. The helmet's continuous chinbar venting system allows air to freely flow keeping you cool on those hot riding days. Customize your helmet and colormatch your interchangeable spoiler to your shield for a unique personalized look.

SHIELD

AIRFORM HELMET

The Airform has not one, but two shields. The unique quick-change fog-free Optics shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

AIRFORM HELMET

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

ILLUMINATUS

AIRFORM HELMET

Behold the ocular opera of eyeballs that is the Airform Illuminatus™ and see it glow an unearthly light. All-seeing and ever-blinking, this slave to sight is a cornucopia of corneas with a ravenous appetite for high-speed thrills. Eye-guzzling every scenic landscape, it can’t help but look where it’s going, but just for good measure, so should you.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFORM Illuminatus - Green $225.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded polycarbonate shell for strength and durability.

SHIELD

Includes Dark Smoke Internal DropShield™ and Clear quick-change Fog-Free Optics™ Shield with Prolock™ shield locking system.

LINER

Hydradry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 air intakes and 1 exhaust port are coupled with deep channeling in the interior energy absorbing EPS foam to keep your head cool.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

ALL-SEEING AND
EVER-BLINKING

EXTERIOR

Streamlined and race inspired, the Airform hits the street ready for speed. By sculpting the traditional neckline of the Airform it allows your head to slip in and out with ease. The helmet's continuous chinbar venting system allows air to freely flow keeping you cool on those hot riding days. Customize your helmet and colormatch your interchangeable spoiler to your shield for a unique personalized look.

SHIELD

AIRFORM HELMET

The Airform has not one, but two shields. The unique quick-change fog-free Optics shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

AIRFORM HELMET

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

LYCAN

AIRFORM HELMET

Sometimes benevolent, mostly untamed, the Airform Lycan™ helmet feels the eternal pull of the moon (insert blood-curdling howl here). This wolf hybrid is a shape-shifting lunatic with raw, untapped animal power. Who knew a helmet graphic could be so omnipotent? We did, and that’s why it’s part of our pack.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRFORM Lycan - Red $225.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded polycarbonate shell for strength and durability.

SHIELD

Includes Dark Smoke Internal DropShield™ and Clear quick-change Fog-Free Optics™ Shield with Prolock™ shield locking system.

LINER

Hydradry™ moisture wicking liner.

FIT

The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING

4 air intakes and 1 exhaust port are coupled with deep channeling in the interior energy absorbing EPS foam to keep your head cool.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

SOMETIMES BENEVOLENT,
MOSTLY UNTAMED

EXTERIOR

Streamlined and race inspired, the Airform hits the street ready for speed. By sculpting the traditional neckline of the Airform it allows your head to slip in and out with ease. The helmet's continuous chinbar venting system allows air to freely flow keeping you cool on those hot riding days. Customize your helmet and colormatch your interchangeable spoiler to your shield for a unique personalized look.

SHIELD

AIRFORM HELMET

The Airform has not one, but two shields. The unique quick-change fog-free Optics shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever.

INTERIOR

AIRFORM HELMET

The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.

LEGION

AIRMADA HELMET

What donned the MAINFRAME™ now graces the AIRMADA; the Legion™ graphic flies again. A flame-laden campaign of terror and intimidation. According to the legends, the dragon cannot be killed. Tap into its power and transform into the beast whose melody of mayhem sings louder than any battlecry. There are secrets that only its fire can tell, discover them in the Airmada Legion™.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRMADA Legion - Silver $270.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded polycarbonate shell for strength and durability.

SHIELD

Fog-Free Icon Optics™ shield with Rapid-Release™ system and ProLock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

The head is long front-to-back and is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead.

VENTING

6 air intakes and 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

A FLAME-LADEN
CAMPAIGN OF TERROR
AND INTIMIDATION

EXTERIOR

AIRMADA HELMET

Streamlined and race inspired, the Airform hits the street ready for speed. By sculpting the traditional neckline of the Airform it allows your head to slip in and out with ease. The helmet's continuous chinbar venting system allows air to freely flow keeping you cool on those hot riding days. Customize your helmet and color-match your interchangeable spoiler to your shield for a unique personalized look.

SHIELD

AIRMADA HELMET

The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead.

INTERIOR

AIRMADA HELMET

The energy absorbing EPS foam liner uses our rider-preferred longer oval head form for a personalized fit without wasting an ounce of space. Combine that with superior venting, removable breath deflector, and a washable Hydradry moisture wicking interior creates a nearly perfect rider-focused enclosure. Once on you may never want to take it off.

TL

AIRMADA HELMET

Blacklights and rock ’n’ roll desires, the things of teen basement lore. The mind-melting luminosity of the Airmada TL™ brings you back to those head-shoppy days of youth with a trippy palette of glow-in-the-dark paints. The giant winged chin only takes a back seat to its rear-facing eagle pilot. He flies from behind, allowing you to lead the pack.

Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
Icon Racing Fall 2019 Motorcycle Street Helmets Collection Icon Racing Fall 2019 Motorcycle Street Helmets Collection
AIRMADA TL - Black $275.00

WORLD STANDARD

Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHELL

Injection molded polycarbonate shell for strength and durability.

SHIELD

Fog-Free Icon Optics™ shield with Rapid-Release™ system and ProLock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts.

LINER

Sublimated Hydradry™ moisture wicking liner.

FIT

The head is long front-to-back and is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead.

VENTING

6 air intakes and 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue.

WEIGHT

A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

MIND-MELTING
LUMINOSITY

EXTERIOR

AIRMADA HELMET

Streamlined and race inspired, the Airform hits the street ready for speed. By sculpting the traditional neckline of the Airform it allows your head to slip in and out with ease. The helmet's continuous chinbar venting system allows air to freely flow keeping you cool on those hot riding days. Customize your helmet and color-match your interchangeable spoiler to your shield for a unique personalized look.

SHIELD

AIRMADA HELMET

The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead.

INTERIOR

AIRMADA HELMET

The energy absorbing EPS foam liner uses our rider-preferred longer oval head form for a personalized fit without wasting an ounce of space. Combine that with superior venting, removable breath deflector, and a washable Hydradry moisture wicking interior creates a nearly perfect rider-focused enclosure. Once on you may never want to take it off.

Shop For Icon Street Gear

RELATED POSTS